Previous Page. Next Page. Axis FD Installation Manual 74 pages. Page 2 Linux-based systems may also be beneficial, for developing shell scripts and applications. Later versions of this document will be posted to the Axis Website, as required. Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up.
More than 3 times better resolu- tion compared to a high-resolution analog camera. Supporting PoE Power over Ethernet , the camera can be powered directly from the network cabling.
Page Setting The Password 4. Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be reset to the factory default settings. See page You will need administrator rights on the computer to do this.
To compensate, focus on an object slightly closer than the intended area. Click the Speaker and Microphone buttons to switch the sound off and on for the speaker and microphone, respectively. Page Video Streams The type to use depends on your requirements and on the properties of your network. Page Configuration 2. The Live View page is now displayed. Click Setup to display the Setup tools. The image can be rotated, the image resolution and compression can be adjusted, and the white balance can be changed.
Resolution includes wide screen , partial which stands for partial scan where an image Page 20 Configurable areas as privacy mask are configurable areas of solid color that can be used to block out certain parts of the video image. Advanced - Camera Settings This page contains settings for fine-tuning the video image. Higher image quality may reduce frame rate and increase motion blur.
A prioritized frame rate may instead increase image noise. By increasing the Max exposure time the quality of the image will increase, but the frame rate will decrease.
To go some of the way towards compensating for this, it is possible to prioritize either the frame rate or the image quality whenever the bit rate would normally need to be increased. Page Audio The speaker connected to the audio output must have a built-in amplifier, e. PC speakers. Page Audio Input When finished speaking, release the button and you will receive audio from the other end of the connection. It is also possible to configure the push-to-talk button so that it toggles between speaking and listening modes.
Page Audio Output Depending on the selected encoding, set the desired audio quality Bit rate. The settings affect the available bandwidth and the required audio quality. Click the Configure button and see Customizing the default page, on page Own Home Page To use a previously uploaded web page as the default page, check the box, select the page from the drop-down list and click OK.
Checking the box for Show video format selection displays a drop-down list on the Live View page allowing you to temporarily change the format. Page Event Configuration When the setup is complete, the connection can be tested by clicking the Test button the connection test takes approximately 10 seconds.
Page Configuring Event Types Up to 10 event types can be configured in the camera, and up to 3 of these can be configured to upload images. Files names can be formatted according to specific requirements. Page 32 5. Set the When Activated Page Motion Detection Activity window the active window has a red frame. Click Save. To exclude parts of the Include window, click the Configure Excluded Windows button and position the Exclude window as required, within the Include window.
Page Port Status If the Normal state for a push button connected to an input is set to Open circuit - as long as the but- ton is not pushed, the state is inactive. If the button is pushed, the state of the input changes to active. Page System Options 1 viewer. Page In the Axis implementation this is done with the help of digital certificates provided by a Certification Authority.
The RADIUS server validates or rejects the certificate and responds to the switch, and sends its own certificate to the client for validation. This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components.
Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals. Every care has been taken in the preparation of this manual. Please inform your local Axis office of any inaccuracies or omissions.
Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response.
If you are connected to the Internet, you can:. Search by product, category, or phrases. Under normal conditions this battery will last for a minimum of 5 years. Low battery power affects the operation of the RTC, causing it to reset at every power-up.
A log message will appear when the battery needs replacing. This directive is applicable in the European Union member states. The WEEE marking on this product see right or its documentation indicates that the product must not be disposed of together with household waste. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.
Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste. Product Features.
Key features. LED indicators. Accessing the Camera. Access from a browser. Setting the Password. Accessing the camera from the Internet. The Live View Page. Video Streams. How to stream MPEG MPEG-4 clients. Motion JPEG. Accessing the Setup tools. Video and Image settings. Audio Settings. Live View Config. HTML Examples. External Video. Sequence Mode.
Event Configuration. Event Servers. Configuring Event Types. Motion Detection. Port Status. System Options. SMTP email. LED Settings. Resetting to the Factory Default Settings.
Its discreet, compact casing effectively protects against tampering. Two-way audio support enables communication with visitors or intruders. Up to 30 fps in VGA. Power over Ethernet reduces cabling and enables centralized power back up. Supported by the industry's largest base of surveillance applications, this camera constitutes the perfect solution for securing e. Status indicator LED. To prevent unauthorized listening, the internal microphone can be disabled by inserting a plug in the 'Audio in' connector.
Network Connector - The camera connects to the network via a standard network connector. Supporting PoE Power over Ethernet , the camera can be powered directly from the network cabling. Audio out - Audio output line level , which can be connected to a public address PA system or an active speaker with a built-in amplifier.
A pair of headphones can also be attached. A stereo connector must be used for the audio out. Audio in - One 3. Serial Number Label - The serial number may be required during installation. Before accessing the camera it must be installed. Please see the installation guide supplied with your product.
The camera can be used with most standard operating systems and browsers. This is automatically installed with AMC. The administrator can disable the installation of the MPEG-4 decoder, to prevent unlicensed copies being installed.
Start a browser e. Internet Explorer, Mozilla. If this is the first time the camera is accessed, see Setting the Password, on page Otherwise enter your user name and password, as set by the administrator. Note: The layout of the Live View page may have been customized to specific requirements. Consequently, some of the examples and functions featured here may differ from those displayed on your own Live View page.
Enter a password and then re-enter it, to confirm the spelling. Click OK. Enter the User name: root. Note: The default administrator user name root is permanent and cannot be deleted. Enter the password as set in step 2 above, and click OK.
If the password is lost, the camera must be reset to the factory default settings. See page You will need administrator rights on the computer to do this. Once installed, the camera is accessible on your local network LAN. To access the camera from the Internet you must configure your broadband router to allow incoming data traffic to the camera.
To do this, enable the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the camera. This is enabled from. For more information, please see NAT traversal port mapping , on page Locking screw. Open the Live View page in the Web interface and make the following adjustments on the camera:. Loosen the locking screw and tilt adjustment screws. Turn the lens to the desired position.
Turn the image balance ring to set the horizontal position. Use the image window to adjust the focus and zoom. Depending on whether or not the Live View page has been customized, the buttons described below may or may not be visible. The Video Format drop-down list allows the video format on the Live View page to be temporarily changed.
The Output buttons control the output directly from the Live View page. Pulse - click this button to activate the output for a defined period of time, e. The Action buttons can trigger an event directly from the Live View page. The Snapshot button saves a snapshot of the video image currently being displayed. Right-click on the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AMC viewer toolbar is not available.
It displays the following buttons:. Click the View Full Screen button to make the video image fill the entire screen area. No other windows will be visible. Press Esc Escape on the computer keyboard to exit full screen. Click the Speaker and Microphone buttons to switch the sound off and on for the speaker and microphone, respectively. Use the sliders to control the volume on the speaker and microphone. The volume can be set between 0 and The Buffer slider controls the size of the buffer for audio.
A higher level will reduce audio break-up, but may introduce a noticeable lag in audio transmission. There are four settings i. When using Half-duplex mode, this button toggles between allowing you to speak and listen.
The first icon indicates that you can talk and the speaker attached to the camera will play your voice. The second indicates that you will hear audio from the camera, but no audio will be sent to any web clients. When in simplex talk mode, the icon toggles between allowing you to speak and is dimmed when you do not want other clients to receive any audio.
The type to use depends on your requirements and on the properties of your network. Note that the image settings of the MPEG-4 stream are the same for all clients.
0コメント