Refer to section 4. There is a separate sub-menu for each IDE device. Page 70 Processor Displays the installed processor information. MPS Table Version [1. Configuration options: [1. Page Memory Configuration Enables node interleaving.
Configuration options: [Disabled] [Enabled] Unganged Mode support [Enabled] Enables or disables the force unganged mode. Page 75 Configuration options: [75ns] [ns] [ Page Pci Pnp 4. Page Peripheral Devices Configuration 4. Page Apm Configuration 4. Page 84 The following items appear when you enable the Smart Fan Control feature.
Configuration options: [40] [45] [50] [55] [60] [65] [70] [75] [80] [85] System1 Target Temperature [50] Allows you to set the system target temperature. Remote Access [Disabled] Enables or disables the remote access feature. Configuration options: [] [] [] [] [] Flow Control [None] Allows you to select the flow control for console redirection.
See section 2. After you have set a supervisor password, the other items appear to allow you to change other security settings. Page Boot Menu These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of devices installed in the system. Page Boot Settings Configuration Allows you to enable or disable the full screen logo display feature.
Page Exit Menu Setup menus. Select YES to load default values. Page 93 This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities. RAID configuration Page Installing Hard Disk Drives 5. For optimal performance, install identical drives of the same model and capacity when creating a disk array.
These keys allow you to move through and select menu options. Page Creating A Raid Volume 5. A pop-up menu appears. Page Rebuilding A Raid Set 5. The RAID set details appear. Create a new RAID set following the instructions in the previous sections. Page Clearing The Disk Data 5. LSI Logic Corp. Page The following screen appears. Page The disk is not large enough to mirror existing data on the primary drive. Page A confirmation screen appears. If you choose this option, data on the first disk will be mirrored on the second disk that you will add to the volume later.
Make sure the data you want to mirror is on the first disk. ALL Data on array disks will be deleted! Integrated Mirroring Enhanced IME supports three to ten disks, or seven mirrored disks plus two hot spare disks. Page Save changes then exit this menu Discard changes then exit this menu Exit the Configuration Utility and Reboot The utility creates the array.
Page Managing Arrays 5. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array. Refer to this section when adding a hot spare disk on an existing volume. When you add the array back to the system, you may reactivate the array. Page Viewing Sas Topology Information about the volume and its member-disks are then displayed.
This disk is then moved to scan ID 0 on the next boot, and remains at this position. This makes it easier to set BIOS boot device options and to keep the boot device constant during device additions and removals.
Page Chapter 6: Driver Installation This chapter provides instructions for installing the necessary drivers for different system components. Driver installation Follow screen instructions to install the RAID drivers. The following windows appears listing both drrvers. Chapter 6: Driver installation Use a PLCC chip extractor.
These can be found online. Native graphics initialization exists XGI Z9s for this board. Framebuffer- and text-mode both work. A serial port is also available. PCB revision 1. Other revisions are believed to only support dual quad-core CPUs. Note: not all CPUs are listed. The iKVM boards are so called because they offer a remote real-time access to the machine through a removable PCI management card, their hardware is the same as the non-iKVM ones.
Native graphics initialization exists XGI Z9s for this board. Framebuffer- and text-mode both work. A serial port is also available. PCB revision 1. Other revisions are believed to only support dual quad-core CPUs. Note: not all CPUs are listed. The iKVM boards are so called because they offer a remote real-time access to the machine through a removable PCI management card, their hardware is the same as the non-iKVM ones.
Note: the SAS functionality is not supported by osboot. There seems to be a 30 second bootblock delay observed by tpearson ; the system otherwise boots and works as expected.
0コメント